Association for Materials Protection and Performance

Abrasive Blaster Certification (C7)

The Abrasive Blaster Certification (C7) validates your ability to set up equipment, select appropriate abrasives, and perform proper blast cleaning techniques in accordance with industry standards.

Aerospace Coating Application Specialist Certification (ACAS)

The Aerospace Coating Application Specialist Certification Program is designed to certify those individual craft workers who have experience and training in all aspects of hands-on surface preparation and coating application to surfaces of aircraft structures, according to the requirements of the Aerospace Coating Application Specialist (ACAS) Program.

Aerospace Engineer Coatings Application (AERO ENG) Training Course

The objective of this course is to support corrosion prevention and control during the lifecycle of the Department of Defense systems. The course familiarizes engineers with corrosion mitigation, coating application, and inspection practices through multiple workshops and problem-solving exercises.

Aerospace Maintainer Coating Application (AERO MAIN) Level 1 Course

The objective of this course is to support corrosion prevention and control during the sustainment life cycle of the Department of Defense systems. The course familiarizes aerospace maintainers with corrosion mitigation and coating application practices through multiple workshops and problem-solving exercises.

AMPP Protective Coatings Specialist (PCS) Certification

The AMPP Protective Coatings Specialist (PCS) certification recognizes those that have the knowledge, skills, and abilities to implement measures to design coating projects that protect the assets, environment, and public from adverse effects of corrosion and coating failure over a projected service life.

Basic Coatings Inspector Certification (CIP Level 1)

The CIP Level 1 course is your first step toward earning the Basic Coatings Inspector Certification. The course combines classroom instruction and hands-on exercises in coating materials, surface preparation, application techniques, and inspection testing.

Basic Corrosion Course and Corrosion Foundations Micro-Credential

The Basic Corrosion Course introduces key concepts in corrosion science, including basic electrochemistry, forms of corrosion, and the impact of environmental and material factors.

Bridge Coatings Inspection Specialty

The Coatings Inspector Program (CIP) Bridge Specialty is designed for inspectors seeking advanced, specialized training in bridge-coating inspection. This specialty builds on your existing Basic Coatings Inspector (CIP Level 1), Certified Coatings Inspector (CIP Level 2), or Senior Certified Coatings Inspector (CIP Level 3) certification.

Bridge Coatings Inspector (BCI) Level 1 Certification

The BCI Level 1 course provides comprehensive training in the fundamentals of bridge coatings inspection, including inspection planning, substrate repair, surface preparation, coating types and characteristics, containment, and inspection documentation.

Bridge Coatings Inspector (BCI) Level 2 Certification

This credential validates your knowledge and field experience in inspecting surface preparation, coating application, containment, and safety practices on bridge steel — preparing you to assume higher-level inspection responsibilities and leadership roles.

Cathodic Protection (CP) Field Techniques Course

The Cathodic Protection (CP) Field Techniques is a two-day course designed as an introduction to corrosion testing and data collection. Personnel new to the corrosion industry are encouraged to attend this highly engaging course to gain foundational knowledge and begin a CP career.

Cathodic Protection Interference

The Cathodic Protection Interference course focuses on AC, DC, and telluric interference. The course provides in-depth coverage of both concepts and practical application of identifying interference and interference mitigation techniques.

Cathodic Protection Specialist Certification (CP4)

The CP4 course focuses on the theoretical concepts and practical considerations that influence cathodic protection system design for both galvanic and impressed current systems.

Cathodic Protection Specialist (CP4) Refresher Course - Virtual

Refresh your CP knowledge before your certification exam with our virtual CP4 Refresher Course. This one-day course highlights the material in the CP4 Specialist five-day class.

Cathodic Protection Technician Certification (CP2)

The CP2 course provides intermediate-level training in corrosion theory and cathodic protection (CP) concepts, types of CP systems, and advanced field measurement techniques.

Cathodic Protection Technologist Certification (CP3)

This advanced program builds on foundational CP knowledge to deepen your ability to interpret field data, troubleshoot complex CP issues, and apply design calculations for both galvanic and impressed current systems.

Cathodic Protection Technologist (CP3) Refresher Course - Virtual

Refresh your CP knowledge before your certification exam with our virtual CP3 Refresher Course. This one-day course highlights the material in the CP3 Technologist five-day class.

Cathodic Protection Tester (CP1)

The Cathodic Protection Tester course provides both theoretical knowledge and practical techniques for testing and evaluating data to determine the effectiveness of both galvanic and impressed current systems and to gather design data.

Certified Coating Applicator (CCA)

The Certified Coating Applicator (CCA) program was designed for experienced industrial coatings applicators. Candidates with this certification can work independently and have extensive knowledge of surface preparation, cleanliness, environmental conditions, coating mixtures, coating application, and safety precautions.

Certified Coatings Inspector Certification (CIP Level 2)

The CIP Level 2 course provides advanced instruction in documenting and performing nondestructive and destructive inspections of liquid and non-liquid coatings on a wide range of substrates.

Coast Guard Basic Paint Inspector Course (COAST GUARD)

This is a 5-day inspection course that was developed to train coatings inspectors in those duties and responsibilities involved in inspecting surface preparation and application for the U.S. Coast Guard.

Coating Application Specialist (CAS) Level 1 Certification Exam

The Coating Application Specialist Level 1 certification is intended for trainee applicators who already have practical experience and want formal recognition of their skills. The certification consists of a one-hour exam.

Coating Application Specialist (CAS) Level 2 Certification

CAS Level 2 certification is for experienced Coating Application Specialists who have significant field experience and are qualified to supervise Level 1 Coating Application Specialists.

Coating Application Specialist (CAS) Prep Course

The Coating Application Specialist - Preparation (formerly CAS - Refresher) is an overview of surface preparation and application covered in the Body of Knowledge of SSPC-ACS 1/NACE No. 13 Applicator Certification Standard No.

Coating Applicator Examiner Qualification

This qualification is designed for seasoned coatings professionals who have deep experience in both applying coatings and inspecting them.

Coatings Foundations for Amusement Parks Micro-Credential and Controlling Corrosion in the Amusement Park Industry Course

Protect assets and ensure guest safety — AMPP's Controlling Corrosion on Amusement Park Structures course equips you with industry-recognized strategies to assess, monitor, and mitigate corrosion on steel and concrete structures in amusement and themed-entertainment environments.

Coatings in Conjunction with Cathodic Protection (CCCP)

The Coatings in Conjunction with Cathodic Protection (CCCP) course focuses on the control of metallic corrosion by protective coatings and cathodic protection, with coatings as the primary method of control supplemented by cathodic protection.

Concrete Coating Applicator Specialist (CCAS) Course

This course provides a comprehensive overview and practical hands-on training for craft worker personnel who wish to be trained and certified in the application of coatings on concrete surfaces. This course offers hands-on exercises that focus on repair of deteriorated concrete, surface preparation of concrete, and coating application of concrete.

Concrete Coating Inspector (CCI) Level 1 Certification

The CCI Level 1 course thoroughly trains you in the proper methods for inspecting surface prep and protective coating installation on concrete assets.

Concrete Coating Inspector (CCI) Level 2 Certification

The CCI Level 2 certification is designed for inspectors with experience evaluating concrete surface preparation and protective coating application in both shop and field environments.

Corrosion and Protection of Concrete Structures and Buildings

Held in partnership with the Australasian Corrosion Association, this course provides valuable information on prevention and remediation of corrosion and deterioration to reinforced concrete structures and buildings.

Corrosion Specialist Certification

Achieve the pinnacle of corrosion expertise with the Corrosion Specialist Certification — our highest-level credential for professionals who lead corrosion control across theory, design, strategy, and execution.

Corrosion Technician Certification

The Corrosion Technician Certification is tailored for individuals with at least two years of corrosion-related work who operate under the direction of more senior technologists.

Corrosion Technologist Certification

Elevate your corrosion career with a Corrosion Technologist Certification — designed for experienced professionals who master theory, prevention, and advanced corrosion control techniques.

Corrosion Under Insulation (CUI) Course and Micro-Credential

Protect critical insulated equipment from hidden degradation with AMPP's Corrosion Under Insulation (CUI) Certification Program. Learn how to identify, prevent, manage, and inspect corrosion that occurs under insulation systems — a serious threat in refining, chemical, offshore, and maritime industries — through expert-led training and included certification exam access to validate your competence.

Corrosion Under Insulation (CUI) Specialty

The Corrosion Under Insulation (CUI) Specialty is designed for inspectors seeking advanced, specialized training in identifying, assessing, and mitigating corrosion risks beneath insulation systems. This specialty builds on your existing Basic, Certified, or Senior Certified Coatings Inspector (CIP Level 1, 2, or 3) credential.

Direct Assessment (DA)

The Direct Assessment (DA) course concentrates on internal, external, and stress corrosion cracking direct assessment, along with pre- and post-assessment, quality assurance, data analysis and integration, and remediation and mitigation activities.

Fireproofing Inspection Specialty

A specialty credential that enhances an existing Coatings Inspector Certification with specialized training to inspect passive fire-protection systems and coatings.

Fundamentals of Protective Coatings (C1) Course

This course provides a fresh insight and a comprehensive overview of Protective Coatings. While intended for those new to the protective coatings industry, the course provides details about protective coatings, preparing surfaces, and how to get the best performance from a coating.

Fusion Bonded Epoxy (FBE): Application and Inspection Level 1 Certification

Designed to address critical workforce gaps, this certification strengthens skills across the entire FBE value chain—not just one role. It promotes safe, sustainable operations and prepares professionals to protect life, property, and the environment.

Ground Vehicle Corrosion / Protective Coatings Course (GROUND VEH)

This course provides a comprehensive overview for army depot personnel who wish to be trained on how to properly prepare and apply coatings on ferrous and non-ferrous metals.

In-Line Inspection (ILI)

The In-Line Inspection course covers the benefits of utilizing In-Line Inspection, selection of technologies related to operational parameters, operational issues, and evaluating data relevant to assessing fitness for service. Presented as lecture, discussion, and group exercises.

Internal Corrosion Technologist Certification and Internal Corrosion Level 1 Course

Gain essential pipeline corrosion expertise with AMPP's Internal Corrosion for Pipelines – Basic Certification. This program combines in-person classroom instruction, hands-on lab exercises, and the certification exam, giving you both the training and credential needed to demonstrate your knowledge and skills in internal corrosion control.

Lead/Hazardous Paint Removal Refresher (C5) Course

This 1-day course provides a review of Competent Person duties and responsibilities in working with lead and other hazardous materials encountered in industrial coatings work. It also reviews relevant OSHA and EPA regulations.

Lead Paint Worker Safety

This 1-day course provides training for workers on lead paint abatement and removal from steel structures.

Marine Coatings Technology Course and Marine Coating Inspection Specialty Certification

Specialized training in marine- and ship-coating inspection that builds on an existing Coatings Inspector credential. Covers marine corrosion, surface preparation, coating application, inspection procedures, and regulatory requirements for safe and durable vessel coatings.

Marine Plural Component (C14) Certification

The C14 certification course is designed to certify craftworkers and applicators who operate plural-component spray equipment and apply two-component, high solids epoxy protective coatings using airless plural-component technology.

NAVSEA Basic Paint Inspector (NBPI) Certification

The NBPI course was developed by Naval Sea Systems Command (NAVSEA) to train coatings inspectors to inspect critical coated areas on Navy ships and similar vessels.

Nuclear Power Plant Training for Coatings Inspectors Course and Nuclear Coatings Inspection Speciality

Gain the knowledge to inspect coatings in highly regulated, safety-critical nuclear environments — learn nuclear-specific requirements for surface preparation, coating application, inspection procedures, and compliance with strict regulatory standards.

Offshore Corrosion Assessment Training (O-CAT) Certification

This in-person, hands-on program combines expert instruction, practical field-oriented training, and the required written and practical exams to validate your ability to inspect, evaluate, and plan maintenance for corrosion protection systems on fixed offshore structures.

Pipeline Coating Applicator (PCA)

The Pipeline Coating Applicator course covers the proper coating application procedures including understanding specifications, surface preparation, application techniques, dealing with changing ambient conditions, and quality control measures, for the most common coating materials to which contractors and inspectors are exposed to on pipeline projects.

Pipeline Coatings Inspection Specialty

The Pipeline Coatings Inspection Specialty adds pipe-coating inspection expertise to your existing Basic, Certified, or Senior Certified Coatings Inspector (CIP Level 1, 2, or 3) credential — enabling you to inspect and certify protective coatings on pipeline systems.

Pipeline Corrosion Assessment Field Techniques (P-CAFT)

The Pipeline Corrosion Assessment Field Techniques course covers corrosion basic principles and theory, field techniques, direct assessment, in-line inspection and hydro testing techniques, indirect inspections, direct examination, safety and data documentation.

Pipeline Corrosion Integrity Management (PCIM) Course

The Pipeline Corrosion Integrity Management (PCIM) course serves as the key training track for the PCIM professional who focuses on the implementation and management of an integrity program for a pipeline system.

Pipeline Corrosion Integrity Management (PCIM) Technician Certification

The PCIM Technician Certification is tailored for professionals working in pipeline systems who want to lead or contribute to integrity management programs.

Pipeline Corrosion Integrity Management (PCIM) Technologist Certification

The PCIM Technologist Certification is intended for experienced pipeline and corrosion professionals who want to move beyond hands-on work into technical leadership and strategic integrity roles. Candidates should have prior pipeline experience and training, including PCIM Technician-level knowledge.

Plural Component Application for Polyureas and High Solid Coatings (PLURAL) Level 1/2

This course is designed to train and certify applicators in the application of protective coatings by airless spray using plural component spray equipment.

Protective Coating Specialist Certification

This certification is awarded to individuals who are experienced, knowledgeable and capable of performing work at an advanced level in both the theory and practice of corrosion prevention and control in the protective coatings field.

Protective Coatings Technician Certification

The PCS-1 Basic Principles Certification is intended for professionals who already have 1-2 years of industry experience or a combination of experience and a relevant degree.

Refining Corrosion Technologist Certification and Corrosion Control in the Refining Industry Course

A foundational program designed to prepare experienced professionals for the Refining Corrosion Technologist Certification. The course teaches how corrosion impacts complex process units and strategies for material selection, design, inspection, and lifecycle corrosion control.

Senior Certified Coatings Inspector Certification (CIP Level 3)

Earn recognition as an expert coatings inspector through the CIP Peer Review process - the oral exam component of the Senior Certified Coatings Inspector (CIP Level 3) credential.

Senior Corrosion Technologist Certification

One of the highest distinctions awarded by AMPP, this certification acknowledges the highest level of academic and practical knowledge in all facets of corrosion and its control, combining technical training with technical experience at a high level.

Senior Internal Corrosion Technologist Certification

The Internal Corrosion for Pipelines - Advanced course builds on foundational internal corrosion knowledge to focus on data analysis, field testing techniques, and high-level mitigation decision making for pipelines.

Shipboard Corrosion Assessment Training (S-CAT) Certification

An in-person certification program that builds foundational knowledge in coatings, corrosion, and corrosion control for assessing the condition of tanks and military ship structures. Includes the required training and certification exam.

Spray Application Certification (C12)

The C12 program evaluates experienced sprayers with a minimum of 800 documented hours applying protective coatings using airless or conventional spray equipment in industrial or marine settings.

SSPC Protective Coatings Specialist (SSPC PCS)

The SSPC Protective Coatings Specialist (SSPC PCS) certification recognizes those individuals who demonstrate a broad depth of knowledge in the protective coatings industry.

Supervisor/Competent Person Training for Deleading and Hazardous Coatings Removal (C3) Course

C3 contains specific discussions on protecting workers, compliance with environmental regulations, proper management of waste streams, operations that result in potential exposures to lead and other hazards, and associated control technology.

Surface Preparation and Paint Application for Power Tool Cleaning Operators and Brush and Roll Paint Applicators Certification (C6)

This course is designed to instruct industrial/marine painters in proper hand and power tool surface preparation methods and brush and roller coating application, in accordance with good paint practice.

Surface Preparation & Paint Application for Shipboard Organizational Level Corrosion Control (SHIPBOARD)

The objective of this course is to support corrosion prevention and control during the lifecycle of the Department of Defense systems.

Thermal Spray Applicator Training (THERMAL APP) Course

This course is designed to train and certify applicators in the application of thermal spray coatings to industrial substrates. Includes classroom instruction, hands-on workshops, written exam, and optional hands-on certification assessment.

Thermal Spray Inspector Training Course and Thermal Spray Inspection Specialty

Gain the knowledge and hands-on expertise to inspect thermal-spray coatings - learn to evaluate surface preparation, application processes, and finished coatings in accordance with NAVSEA, DOT, and industry standards. The Thermal Spray Inspection Specialty certifies individuals in the inspection of thermal-spray coating systems.

Waterjetting Certification (C13)

This program assesses the skills of waterjetters who have a minimum of 120 hours waterjetting work experience and prior documented employer-provided training on the waterjetting equipment they use on the job.